2025 04 CNH Etimgo 8 20 Download

Size of disks:  Etimgo 250 GB

Type of catalogue:  Repair manual, Diagnostic Software

Make:  Case, Kobelco, New Holland

Region:  WorldWide

Languages:  English

Windows:  Windows 8/8.1 64 bit, Windows 10 64 bit

The list of models depends on the region/country that you selected when activating EST.

Note:

This is eTIMGO only, not including CNH EST

- Install CNH EST first (Your computer must have CNH EST software version 9.2 installed）

- And then install Etimgo

Important Notice! Please take into account that CNH etimGo requires at least 100 Gb of free HDD space for its installation files. Moreover up to 250 Gb of free HDD space is additionally required if you planning to install all brands. Not all the brands can be installed simultaneously, you can dynamically install necessary brands or their models/series data which is even more convenient in the case of small HDD/SSD volume.

Depending on the particular model there will be all the manuals, bulletins electrical diagrams and diagnostic procedures, or even parts catalogs (if you are interested in a specific model or series - ask us, we will check its availability).

eTIM GO offline document access: (For some model series this information may be incomplete, it's getting updated from time to time. This is how the application works, please ask for particular model series info if it's very important for you)

Falt Code Resolutions

Wiring Schematics

Complete Service Manuals

Installation instructions

Operator's manual

Knowledge Articles

Service Bulletin

Standard Repair Time

Each brand contains the following tabs:

- Dashboard

- Product

- Document

- Search

You can easily navigate the tabs looking for the information and data you need.

To your attention is presented the Offline Database eTimGo AGCE for CNH EST all brands:

* Case Agriculture

* Case Construction

* New Holland Construction

* New Holland Agriculture

* Flexicoil

* Miller

ISUZU IDSS Diagnostic Tool

Isuzu Diagnostic Service System 2025.03 updates and reprograms controllers for Isuzu commercial vehicles using part numbers and new calibration files.

NOTE:

E-IDSS exclusive software for Isuzu Industrial engines,Can Not use in truck and bus engine.if you want diagnostic truck, bus and pickup, you buy G-IDSS 2018 Is OK.

 

E-IDSS USB-Link works very well, but there is no ECU/ECM plug connector, so it can't write data into ECM/ECU. Other functions can be perfectly diagnosed, including Euro IV, Euro 5 DPF regeneration function, injector code, write VIN, diesel pump Functions such as adjustment functions e-idss is software USB-LINK Special Edition is hardware. It can only test the Isuzu engine sensor, adblue and DPF of the Denso ECU/ECM

 

It can test the Isuzu engine sensor, adblue and DPF of the Diagnostic Denso ECU but it can't test the Bosch and Delphi systems ISUZU. Only test denso isuzu,denso KATO,denso kobelco,denso Sumitomo denso HITACHI ECU/ECM.

 

IDSS Isuzu Global Diagnostic services System (E-IDSS ) 2018.

All regions

Languages: English, Japanese chinese

OS: Win7 x32, Win7 x64, Windows10 x32/x64

Quantity of CD: 1 DVD

Data of update: 7/2018

 

DENYO

2005-2015 (4JJ1 Tier-4, 4HK1 Tier-4, 6WG1 Tier-4, 4LE2 Tier-4, 6WG1 INT-Tier-4, 4JJ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3, 6WG1 Tier-3)

Doosan

2005-2010 (6WG1 Tier-3, 6UZ1 INT-Tier-4, 6WG1 INT-Tier-4)

Hidromek

2005-2012 (4JJ1 INT-Tier-4, 4HK1 INT-Tier-4, 6HK1 INT-Tier, 4JJ1 Tier-3, 6UZ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3)

Hitachi

2005-2015 (4JJ1 Tier-4, 4HK1 GB3, 6HK1 GB3, 6UZ1 GB3, 6WG1 GB3, 4JJ1 GB3, 4HK1 tier-4, 6HK1 tier-4, 6UZ1 tier-4, 6WG1 tier-4, 4HK1 INT-Tier-4, 6HK1 INT-Tier-4, 6UZ1 INT-Tier-4, 6WG1 INT-Tier-4, 4JJ Tier-3, 4HK1 Tier-3, 6HK1 Tier-3, 6WG1 Tier-3)

Hokuetsu

2005-2014 (4LE2 Tier-4, 4JJ1 Tier-3, 6UZ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3)

HSC

2005-2010 (6HK1 INT-Tier-4, 4HK1 Tier-3, 6HK1 Tier-3, 6WG1 Tier-3)

IHI

2005-2006 (4JJ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3)

ISEKI

2006-2012 (4JJ1 INT-Tier-4, 4JJ1 Tier-3)

Isuzu PT-China

200 5-2015 (6WG1 GB3, 4HK1 INT-Tier-4, 6HK1 INT-Tier-4, 4JJ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3)

Isuzu America

2005-2013 (4JJ1 Tier-4, 4LE1 Tier-4, 4JJ1 Tier-3, 6UZ1 Tier-3 Tier-4,

4HK1 Tier-3, 6HK1 Tier-3, 6WG1 Tier-3)

IWAFUJI

2005-2006 (4JJ1 Tier-3, 4HK1 Tier-3)

JCB HP

2005-2010 (6HK1 INT-Tier-4, 4HK1 INT-Tier-4, 4JJ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3)

KATO

2006-2013 (4LE2 Tier-4, 4JJ1 INT-Tier-4, 4HK1 INT-Tier-4, 4JJ1 Tier-3)

KCM

2005-2014 (6WG1 Tier-4, 6WG1 INT-Tier-4, 4HK1 Tier-3)

KG Flowtech no

2005 (4HK1 Tier-3)

Kobelko

2013 (4LE2 Tier-4)

Madill

2005 (6HK1 Tier-3)

Maeda Seisakusho

2013 (4LE2 Tier-4)

Morooka

2010 (4HK1 INT-Tier-4)

NH Kobelco

2005 (6HK1 Tier-3)

Nihon Josetsu

2005-2013 (4LE2 Tier-4, 4JJ1 INT-Tier-4, 4HK1 INT-Tier-4, 4JJ1 Tier-3, 4HK1 Tier-3)

Nihon Sharyou

2005-2006 (4JJ1 Tier-3, 6UZ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3)

Sakai

2005-2012 (4JJ1 INT-Tier-4, 4JJ1 tier-3, 4HK1 Tier-3)

Sanward

2005-2006 (4JJ1 Tier-3, 4HK1 Tier-3)

Sany

2005-2014 (6WG1 GB3, 4HK1 INT-Tier-4, 6HK1 INT-Tier-4, 4JJ1 Tier-3, 4HK1 Tier-3)

Shinko Engineering

2005 (4HK1 Tier-3, 6HK1 Tier-3)

Sumitomo

2005-2015 (4JJ1 Tier-4, 4HK1 GB3, 6HK1 GB3, 4HK1 Tier-4, 4JJ1 GB3, 6HK1 Tier-4, 4LE2 Tier-4, 4JJ1 INT-Tier-4, 4HK1 INT-Tier-4, 6HK1 INT-Tier-4, 6UZ1 INT-Tier-4, 4JJ1 Tier-3, 6UZ1 Tier-3, 4HK1 Tier-3, 6HK1 Tier-3, 6WG1 Tier-3)

Takeuchi

2 006-2013 (4JJ1 Tier-4, 4JJ1 INT-Tier-4, 4JJ1 Tier-3)

Unicarriers

2005-201 0 (4HK1 INT-Tier-4, 6HK1 INT-Tier-4, 4HK1 Tier-3, 6HK1 Tier-3)

Uotani

2005 (4HK1 Tier 3)

Yamabiko

2005 (4HK1 Tier-3, 6HK1 Tier-3)

Package includes:

1pc x E-IDSS program（Diagnostics activation,reflash not activation）

1pc x IDSS USB-Link 1 adapter

1pc x USB cable

1pc x 6-pin/9-pin American cable

1pc x E-IDSS OBD2 cable

1pc x KATO Cable With DC 2.1 Famale

1pc x HITACHI EMPS-III Cable

1pc x CANBUS 3pin

Best Quality VCM II Ford VCM2 Ford Diagnostic Tool

The VCM II is the new for Ford OEM diagnostic tool. It provides dealer-level diagnostics using the IDS software.

The VCM II is the brand new diagnostics interface from Ford for use with the Integrated Diagnostics Software (IDS).

The VCM II and IDS, along with a dedicated laptop, provides full dealer diagnostic capabilities for most 16 pin Fords.

The VCM II will be required for all new 2022 Ford vehicles and is backwards compatible with most 16 pin Fords.

It supports the Vehicle Measurement Module (VMM) and new Customer Flight Recorder (CFR).

The VCM II has shock resistant rubber ends, making it suitable for garage and workshop environments.

The CFR replaces the Vehicle Data Recorder (VDR).

The CFR is an optional cable that allows the VCM II to monitor and record live data streams.

This provides an advantage for technicians when diagnosing intermittent problems.

Highlights of VCM II for Ford:

1.IDS Software Version: V115 or V131

2.Multi-language: English, Italian, Spanish, Spanish(Mexico), French, French(Canada), German, Dutch, Finish, Danish, Greek, Slovenian, Amer English, Vietnamese language, Turkish, Thai, Swedish, Russian, Portuguese, Portuguese(Brazil), Polish, Norwegian, Korean, Japanese, Indian, Czechic, Chinese(Taiwan), Chinese(China)    

3.Update: Via CD or hard disk

4.Operating System: Windows 7 64bit

5.Vehicles Coverage: VCM II provides full dealer diagnostic capabilities for most 16 pin for Fords, including all new 2022 for Ford vehicles

6.VCM II Scan tool can do diagnose, scan, airbag, key programming, ecu programming, PCM programming via OBD2 port till 2022

VCM II for ford Features:

1.The VCM II is the new for Ford OEM diagnostic tool. It provides dealer-level diagnostics using the IDS software.

2. The VCM II is the brand new diagnostics interface from for Ford for use with the Integrated Diagnostics Software (IDS).

3. The VCM II and IDS provides full dealer diagnostic capabilities for most 16 pin for Fords

4. The VCM II will be required for a few new 2022 for Ford vehicles and is backwards compatible with most 16 pin for Fords.

It supports the Vehicle Measurement Module (VMM) and new Customer Flight Recorder (CFR).

5. The VCM II has shock resistant rubber ends, making it suitable for garage and workshop environments.

6. The CFR replaces the Vehicle Data Recorder (VDR).

7. The CFR is an optional cable that allows the VCM II to monitor and record live data streams. This provides an advantage for technicians when diagnosing

VCM II VCM2 Function:

1.Automatic vehicle recognition

2.Read & Clear Diagnostic Trouble Codes (DTCs)

3.Live Data-stream with Recording & Playback Functions for Main ECUs

4.Guided Fault Finding

5.New Software Re-flash for Existing ECUs

6.Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)

7.Program New Keys

8.Injector Coding

9.Set, Adjust or Remove Speed Governors

10.DPF Regeneration

11.Brake Bleeding

12.Steering Angle Resets

13.All Other Dealer Functions

VCM II Package List:    

1pc x VCM2 interface

1pc x OBD2 cable

1pc x USB cable

1pc x CD-DVD

1pc x 500G HDD with the Latest software in HDD (optional)

1pc x Second Hand Lenovo T450 Laptop With The latest Software (optional)

Second Hand Laptop Lenovo T450 Specification:

Brand: Lenovo

Condition: Used

Type: Laptop/Notebook

Screen Size: 14

Processor Type: Intel (R) Core(TM) I5-5200U CPU

Memory: 8GB

US$158 - VAS 6154A DoIP OBD2 Scanner Original Tool

VAS 6154A is the latest for full system diagnostic and programming interface, which can read and clear code, dynamic data flow, programming, coding, and personalized settings, including maintenance information systems, technical briefings, circuit diagrams, component drawings, diagnostic guidelines, etc.  It can support WIFI and USB Connection, support multi-language, and also can work with 6150 and 6160A.  6154 works perfectly with partial win10 models, but not for all.

Highlights:

1. VAS 6154A Work with original driver, Don't need driver manager

2. With base station/hotspot mode switching button.

3. Only This VAS 6154A Work with newest ODIS V25.03 and Engineering V19.0 Software

(Support service v9.10/v10.0/v11.0/V23.01/V24.1.1/V24.3/25.03+, Support Engineer v14.1/v15.0/v16.0/v17.0.1/18.0/18.2/19.0+)

4. No third-party device manager software is required

5. VAS 6154A can supports DOIP dignosis

6. Support win 10 pro/ultimate

Covered model:

Forvw: 1995Y-2025MY+

ForAudi: 1995MY-2025MY+

ForSeat: 1995MY-2025MY+

ForSkoda: 1995Y-20254MY+

ForBentley: 1995MY-2025MY+

ForLamborghini: 1995MY-2025MY+

ForMAN: 1995MY-2025MY+

Function:

– Estimated remaining times are shown for ECU flash operations.

– Diagnostic protocol contains interruptions of GFF sessions, extended measurement values, improved ECU communication view,used diagnostic hardware, connection type of diagnostic hardware, operating system, the hotfix used and submissions of support requests

– The measured value display has been improved.

– Documents in GFF are displayed in separate windows.

– One message box will be shown at the beginning of the test drive mode.

– GFF hotfixes can be integrated during diagnostic sessions.

– Danger messages have been revised.

– Stopping of diagnostic sessions may be interrupted.

– Automatic deletion of autosave diagnostic protocols after successful transmission.

– Selection of PassThru diagnostic hardware has been improved.

– Service Software update has been stabilized.

The Following Vehicle Bus Systems are Supported

K line (ISO9141-2)

High-speed CAN (ISO 11898-2)

Low-speed CAN (ISO 11898-3)

J1850 (SAE)

Packing List:

1.1pcs X VAS6154A

2.1pcs X Latest Software (256GB SSD) (Optional)

3.1pcs X Second hand Lenovo T450 Laptop With Latest Software (Optional)

Land Rover ECU Programming and Tuning Guide

ECU programming and tuning for Land Rover vehicles can significantly enhance their performance, fuel efficiency, and driving experience. This process involves reprogramming the vehicle's Engine Control Unit (ECU), which is responsible for managing essential engine functions like fuel injection, ignition timing, and more. Here’s a comprehensive guide to help you get started with Land Rover ECU tuning.

What is ECU Programming and Tuning?

ECU programming and tuning modify the engine's control parameters to optimize performance. Adjustments might include fuel delivery, ignition timing, and turbo boost, all aimed at unlocking additional power or improving efficiency. By recalibrating these settings, ECU tuning enables the engine to perform better, making the vehicle more responsive and often more fuel-efficient.

Benefits of Land Rover ECU Programming and Tuning

    Increased Performance: Tuning the ECU can enhance engine power, leading to improved acceleration, higher speeds, and more responsive handling.

    Improved Fuel Efficiency: Optimizing engine settings can increase fuel efficiency, allowing the vehicle to get more miles per gallon.

    Customizable Settings: You can tailor the ECU settings to match your driving style or specific needs, such as enhanced off-road performance or daily commuting.

    Enhanced Towing Capabilities: Tuning for increased torque can improve towing power, making your Land Rover more capable of handling heavy loads.

Methods for Tuning Your Land Rover ECU

Here are the most common methods used to tune Land Rover ECUs:

1. Aftermarket Software

    Software like HP Tuners and EcuTek provides access to the ECU's parameters, allowing for in-depth customization. These software tools are powerful but often require familiarity with tuning principles.

    Advantages: Complete control over ECU settings, allowing fine-tuned adjustments for performance and efficiency.

    Requirements: Laptop, compatible software license, and some technical knowledge.

2. Performance Chip

    A performance chip, or "tuner," can be installed in the ECU to adjust the engine’s performance settings. These chips come either pre-programmed for general performance improvements or can be custom-programmed.

    Advantages: Quick installation and noticeable performance gains.

    Requirements: Purchase of a compatible chip; installation can be DIY or professional.

3. Handheld Tuning Device

    Handheld tuners, like the Cobb Accessport, plug into the OBD-II port and offer an easy-to-use interface for adjusting engine settings. These devices usually come pre-loaded with various tuning maps.

    Advantages: User-friendly interface; can be used to quickly switch between tuning profiles.

    Requirements: Purchase of the device; minimal technical knowledge needed.

Important Considerations

    Warranty: ECU tuning may void certain warranties, so check with your dealer or warranty provider before making modifications.

    Professional Tuning Services: If you’re not familiar with ECU tuning, consider hiring a professional to ensure safe and effective adjustments.

    Legal Compliance: Ensure that any tuning modifications comply with local emissions laws and regulations.

Safety Tips

    Backup the Original ECU Map: Before tuning, back up the factory settings. This enables you to restore the vehicle’s default settings if needed.

    Monitor Engine Performance: Use monitoring tools to track engine performance after tuning. This ensures settings are optimized and helps avoid potential issues.

With the right tools and knowledge, ECU tuning can transform your Land Rover’s performance, making it better suited to your driving needs.more information please visit jaguar land rover trouble repair

Piwis 3 with update V44.800.022

Are you in need of a reliable and efficient diagnostic tool for your Porsche? Look no further! I have a Piwis 3 unit for sale, equipped with the latest update version V44.800.022, derived from Piwis 4, complete with essential flash files. This third-generation Porsche diagnostic tool is designed to be user-friendly and highly efficient, making it a perfect choice for both professional mechanics and Porsche enthusiasts alike.

Key Features:

- Latest Software Version: The Piwis 3 comes with V44.800.022 and V38.250 pre-installed on a Lenovo Yoga i5 Touch Screen Laptop. This setup allows for seamless updates and enhanced performance.

- Advanced Capabilities: The V44.800.022 engineering software significantly outperforms the ordinary V43.300.22 software. It supports coding for the latest Porsche models from 2022 to 2023, alongside a wealth of offline programming data. This means you can confidently work on the newest vehicles with ease.

- Compatibility with Older Models: Not only can you service the latest models, but the Piwis 3 is also fully compatible with older Porsche models, thanks to its robust software and hardware capabilities. This versatility makes it an invaluable tool for any Porsche technician.

Technical Specifications:

- Model: Piwis 3

- Software Versions: V43.300.22 + V38.250.00

- Laptop: Lenovo Yoga i5 Touch Screen

This is a fantastic opportunity to own a top-tier diagnostic tool that will enhance your automotive service capabilities. Whether you are a professional in the automotive field or a passionate Porsche owner seeking to maintain your vehicle in peak condition, the Piwis 3 is the perfect solution.

The Versatile USB Link 2: Your Ultimate Diagnostic Tool

In today's technologically advanced world, efficient and reliable diagnostic tools are crucial for automotive maintenance and repair. One such tool that has gained immense popularity is the USB Link 2. Compatible with a wide range of applications, this device offers comprehensive diagnostic capabilities for engines, transmissions, ABS, instrument panels, and much more.

Reasons to Get NEXIQ USB Link 2:

1. Wide System Support:

The USB Link 2 is compatible with both XP and Windows 7 operating systems. However, it's important to note that certain software, such as Volvo Hino Perkins Cat Nissan, must be used on the XP system, while other software can be used on Windows 7 32-bit.

2. Comparable Performance to Nexiq:

The USB Link 2 performs exceptionally well, living up to the standards set by the renowned Nexiq brand. It offers the same high-quality diagnostics and reliability, ensuring accurate results every time.

3. Extensive Compatibility:

Whether you need to diagnose engines, transmissions, ABS, or instrument panels, the USB Link 2 has got you covered. Its compatibility with various applications makes it a versatile tool for any automotive professional.

4. Faster Reprogramming:

With its direct USB connection, the USB Link 2 significantly reduces reprogramming times. This feature allows for quick and hassle-free updates, saving valuable time during maintenance procedures.

5. Mixed Fleet Capabilities:

The USB Link 2 boasts broad protocol support, enabling it to work seamlessly with mixed fleets. Whether you're dealing with different vehicle makes or models, this device can handle it all, making it a valuable asset for any workshop.

6. Quick Access to Vehicle Data:

Efficiency is key in the automotive industry, and the USB Link 2 provides quick access to essential vehicle data. This feature is particularly useful for generating maintenance reports or managing fleet operations, ensuring optimal performance and safety.

7. Convenient Attachment:

The USB Link 2 can be easily attached to a vehicle's diagnostic connector, eliminating the need for complicated setups or additional equipment. Its user-friendly design ensures hassle-free connectivity, allowing you to focus on the task at hand.

8. Portability and Flexibility:

Designed for convenience, the USB Link 2 can be used with both desktop PCs and laptops. Its lightweight and portable nature increase flexibility, making it a suitable choice for professionals who need to work on the go.

What does a USB Link 2 do?

The USB Link 2 is a powerful diagnostic tool that comes equipped with sixteen times more random access memory than its predecessors. Additionally, it supports heavier bus loads on simultaneous channels, ensuring seamless performance even under demanding conditions.

How to connect Nexiq USB Link 2 Bluetooth?

To connect the Nexiq USB Link 2 via Bluetooth, follow these simple steps:

1. Insert the USB Bluetooth Adapter CD into your PC's CD-ROM drive.

2. Install the necessary Bluetooth drivers as prompted by the installation wizard.

3. Plug the Bluetooth adapter (dongle) into an available USB port on your laptop.

4. Ensure that both the USB Link 2 and your laptop's Bluetooth are turned on.

5. Pair the USB Link 2 with your laptop via Bluetooth settings.

6. Once successfully connected, you can start using the USB Link 2 wirelessly, providing you with added convenience and freedom of movement.

Conclusion:

The USB Link 2 is a must-have diagnostic tool for any automotive professional. Its compatibility, performance, and ease of use make it an invaluable asset for efficient and accurate vehicle diagnostics. Invest in the USB Link 2 and experience the convenience and reliability it offers in diagnosing engines, transmissions, ABS, instrument panels, and much more.